ASTM F963-08 PDF
This specification2 relates to possible hazards that may not be recognized readily by the public and that may be encountered in the normal use for which a. ASTM F available in Chinese here: COMPS/htm. – Both F‐07e1 and F‐08 can be included as a. Both F ASTM F (PF) – Designation: F – 08 An American National Standard Standard Consumer Saf.
|Published (Last):||8 February 2010|
|PDF File Size:||7.87 Mb|
|ePub File Size:||12.59 Mb|
|Price:||Free* [*Free Regsitration Required]|
The thickness shall be determined using the test method in 8. All other switches are to be subjected to cycles of endurance testing. If such is the case, a torque and tension test shall be performed on an arm, leg, or other appendage of the toy instead of the seam test. Toys which use non-replaceable batteries as the only source of power are not subject to 6.
Criteria for determining which toys are subject to these requirements are provided, in part, in 16 CFR TIA sometimes provides its interpretations of this speci? The locking mechanism shall not unlock until a minimum force of 10 lbf 45 N has been achieved. A new toy shall be used that has not been subjected to other f96-08 and abuse testing.
The load shall be applied gradually over a period ast, 5 s and maintained for 10 s.
ASTM F – 17 Standard Consumer Safety Specification for Toy Safety
Age Group 18 months or awtm over 18 months, not over 36 months over 36 months, not over 96 months Weight Criteria, lb kg less than 3 6 0. If a permanent partition or bars two or morewhich effectively limit the continuous space by making the largest internal dimension less than 6 in. If not separated by that distance, the labeling statements f96308 be surrounded by a border line.
Test Methods for Locking Mechanisms or. It does not purport to cover every conceivable hazard of a particular toy.
The toy shall conform to the requirements listed in 4. The length of the strap shall be measured when the product is placed on a horizontal surface with no f693-08.
Illustrations of the paci? If necessary, centrifuge at g for no longer than 10 min. Stability and Over-Load Requirements. Each motor shall be tested separately using fresh alkaline batteries. The remaining tests in this section apply to types of toys as speci?
Each producer or distributor who represents his products as conforming d963-08 this speci? These markings are not required for nonreplaceable batteries or for rechargeable battery packs that, by design, can only be inserted in the correct orientation. Whenever it is practicable, it is always an alternative to rotate the test object instead.
The weight of each toy is determined prior to the beginning of the test. If a fuse or protective device operates opens or trips the device must be replaced or reset as many times as necessary to complete the required number of cycles.
The toy shall be pushed slowly over the edge of the top step in the appropriate attitude and released as soon as it begins to fall of its own weight. This requirement does not apply to magnets used in motors, relays, speakers, electrical components, and similar devices where the magnetic properties are not part of the play pattern of the toy. Examples include toy tools, small electronic games, stuffed animals, dolls, musical toys, and cap-?
A rattle shall meet this requirement when tested under the force only of its own weight and in a noncompressed state.
With the cord secured in a vertical fashion so that the breakaway feature is essentially in the center of the two clamping devices, apply a downward force and determine if the breakaway feature releases at a force less than 5. The analytical results t963-08 should be adjusted in accordance with the test method in 8.
ASTM F963-11 Toy Safety Testing
aatm The locking device shall engage automatically when the product is placed in the manufacturer’s recommended use position. This requirement applies to keys with? Possible entanglement or strangulation. Handles or hinges wstm to the toy made with pliable material straps and ropes axtm ashm considered exempt. The ventilation areas shall consist of a minimum of two holes, with a total of at least 2 in. For products that contain a balloon and a small ball, small object, or marble, only the signal word and statement of hazard may be combined.
The toy shall be inspected after such tests, and hazards such as points, sharp edges, and release of small parts shall be evaluated in accordance with the relevant requirements listed in Section 4.
If an accessible, circular hole in any rigid material less than 0. EN Safety of toys. Its aim is to reduce possible safety hazards of toys.
Work Item s — proposed revisions of this standard.